Riello RS 70/E MZ Instrukcja Obsługi Pobierz pdf (Strona 35)

Parameter

Number of

elements

Unit of mea-

surement

Modifica-

tion

Values interval

Degree of preci-

sion

Predefined

setting

Access mode

No. par. Description Min. Max.

148

Selection of the burner operation during the interruption of the switch-over

with the system of remote management.

0 = burner switched off

With modulating operation the settings of the values are the following:

0...19.9 = burner switched off

20...100 = 20...100% burner modulation field (20% = low flame)

These settings adapt to parameters 545 (modulation minimum) and 546

(modulation maximum)

With stage operation: 0 = burner switched off, 1st, 2nd, 3rd stage according

to the values assigned to P1, P2, P3

No setting = no function in the event of communication interruption

Modification /

zero setting

0 % 100 % 0.1 % Not defined Parameters Mode

161 Total number of errors 1 - Reading only 0 65535 1 0 Service Mode

162 Hours of operation (that can be reset) 1 h Reset 0 h 999999h 1 h 0 h Info Mode

163 Total hours of power supply to control box 1 h Reading only 0 h 999999h 1 h 0 h Info Mode

164 Total number of start-ups (that can be reset) 1 - Reset 0 999999 1 0 Info Mode

166 Total number of start-ups 1 - Reading only 0 999999 1 0 Info Mode

167

Volumetric delivery of fuel in the selected unit of measurement

(that can be reset)

1 - Reset 0 99999999 1 0 Info Mode

200 Checks on the burner

201

Burner operation mode (fuel supply line, modulating/stage, servomotors,

etc.)

-- = not defined (eliminate curves)

1 = Gmod

2 = Gp1 mod

3 = Gp2 mod

4 = Lo mod

5 = Lo 2 stages

6 = Lo 3 stages

7 = Gmod pneu

8 = Gp1 mod pneu

9 = Gp2 mod pneu

Modification /

zero setting

1 9 1 Not defined Parameters Mode

208

Stopping of the program

0 = deactivated

1 = Pre-purging (Ph24)

2 = Ignition (Ph36)

3 = Interval 1 (Ph44)

4 = Interval 2 (Ph52)

1 - Modification 0 4 1 0 Parameters Mode

210 Alarm/lockout at start 1 - Modification 0 1 1 0 Parameters Mode

211 Uphill train fan motor 1 s Modification 2 s 60 s 0.2 s 2 s Parameters Mode

212 Maximum time to reach low flame 1 s Modification 0.2 s 10 min 0.2 s 45 s Parameters Mode

215 Maximum repeats of safety circuit 1 - Modification 1 16 1 16 Parameters Mode

Start-up, calibration and operation of the burner

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Riello RS 70/E MZ Instrukcja Obsługi Strona 35

Komentarze do niniejszej Instrukcji